Instructions to connect battery meter when lithium is ordered

I've received my lithium batteries, now what? How do I connect the battery meter?

The enclosed meter is to be installed on your mobile powered workstation(s) equipped with a Lithium Iron Phosphate (LiFePO4) battery. This meter is intended to compliment the mobile app which you may have already installed. For most accurate battery monitoring, download the �PowerSonic� App from either the App Store or Google Play if you haven�t done so already. PLEASE NOTE: Your workstation may have existing wires for this meter. However, an extra set of wires have been included if needed. This meter will simply snap into the punch-out (hammer and punch may be required) at the top of the cart�s mast and the wires are to be plugged in to the following locations: Tab #1 = red wire Tab #2 = black wire Tab #3 = red wire The wires should be connected to the battery as follows: Red ring terminal = battery positive at fuse block Black ring terminal = battery negative terminal (We have included a longer bolt for the negative battery terminal to fit all ring terminals.)